Shanghai Minggong Heavy Equipment Co., Ltd
E-mail:sales@jxjq.com
You Are Here:Minggong home >> news
- NEWS
How does a jaw crusher work
- Jaw crushers have many advantages, such as big reduction ratio, equal product granularity, simple structure, reliable working condition, convenient repair and economical operation, which are widely used for mine, smelting, building material, road, railway, irrigation works, chemical and materials with cold compression strength no more than 320 MPa.Jaw crushers for crushing rock and other minerals conventionally comprise a fixed jaw and a movable jaw which define a crushing chamber of a cross section which narrows from top to bottom. The movable jaw is pivotally supported at its upper end so that the lower end of the jaw can be driven in a swinging motion towards and away from the lower end of the fixed jaw. Material to be crushed is introduced into the upper end of the crushing chamber formed between the two jaws and is crushed between the two jaws by the swinging movement of the movable jaw as the material moves downwardly through the chamber, the crushed material being discharged from the chamber at its lower end. The crushing surfaces of the two jaws are subject to substantial wear and are conventionally formed by replaceable faces which are fixed to the body of the jaw by being bolted and keyed. Usually, to facilitate breakage of the rock the surface of each replaceable jaw face is corrugated, with the axes of the corrugations extending in a vertical direction and normally each jaw carries two separate jaw faces, namely an upper face and lower face. The primary effect of the corrugations is achieved at the lower, narrow, end of the crushing chamber, and in order to generate the necessary breaking forces the opposed jaw faces of the two jaws are so arranged that the peaks of the corrugations of one of the jaw faces align with the troughs of the corrugations of the other jaw face. As a result of this, with conventional jaw faces there is limited scope for interchangeability of the various jaw faces to compensate for wear, most of which occurs at the lower end of the crushing chamber; for example with conventional jaw faces the upper and lower jaw faces or each jaw could be interchanged but there is not complete flexibility to interchange the four jaw faces while retaining the required relationship between the sets of corrugations.
Correlation Information
product list
- crusher equipment
- Sand Making Machine
- Stone Making Machine
- Stone crusher
- Jaw Crusher
- Impact Crusher
- Cone Crusher
- Single-stage Hammer Crusher
- Ring Hammer Crusher
- Hammer Crusher
- Vertical Shaft Impact Crusher
- Roller Crusher
- Fine Impact Crusher
- Rod Mill
- Mobile Crusher Station
- Vibrating Feeder
- Vibrating Screen
- Belt Conveyor
- Sand Washer
- Stone Washer
- Beneficiation Equipment
- Beneficiation Equipment
- Ball Mill
- Ceramic Ball Mill
- Drier
- Metallurgy Rotary Kiln
- Magnetic Separator
- High Gradient Magnetic Separator
- Classifier
- Flotation Machine
- Disk Vacuum Filter
- Construction Material Production equipment
- Cement Production Line
- Cement Rotary Kiln
- Cyclone Preheater
- Cement Mill
- Raw Mill
- Coal Mill
- Vertical Mill
- Powder Concentrator
- Pulse Bag Dust Collector
- Rotary Kiln
- Lime Rotary Kiln
- Vertical Preheater
- Vertical Cooler
- Active lime assembly line
- Autoclaved Aerated Concrete Equipment
- Steel Wire Belt Elevator
- Chain Bucket Elevator
- Screw Weigher
- Belt Scale
Copyright @ 2011. Shanghai Minggong Heavy Equipment Co.,Ltd.All Rights Reserved
International Trade Department：0086-21-59515633 59515366 E-mail：sales@jxjq.com
Address: No.299 Shenzhou Road,Fengxian District,Shanghai,China. P.C: 201499
International Trade Department：0086-21-59515633 59515366 E-mail：sales@jxjq.com
Address: No.299 Shenzhou Road,Fengxian District,Shanghai,China. P.C: 201499