logo

Shanghai Minggong Heavy Equipment Co., Ltd

E-mail:sales@jxjq.com
You Are Here:Minggong home >> news
NEWS

Cone Crusher Bowl Bearing Maintenance

Cone Crusher Bowl Bearing Maintenance include:

(A) the maintenance of a fixed bowl, bowl-shaped tile is use of cylindrical pin fixed to the cast zinc bearing . if loose ,it need to re-cast zinc alloy. When the lifting the moving cone, it will be glued to the cone sphere, and causing the accident;

(B) exam the watt bowl’s contact condition: The bowl-watt bowl contact surface of the outer ring ,it should be in contact with the contact ring width 0.3-0.5 feet, if exposure to excessive scratching it should be re-repair;
 
(C) Check the surface of tile bowl: When the tile surface wear to the oil groove’s bottom (oil groove polished) or showing a fixed pin or cracks ,it should be replaced;

(D) bearing Bowl should be tie with the rack, if grind gap occur .after the abrasion occur, the spindle will cause poor contact with their sleeve, or even to impact each other . the inti-dust water will splash into the machine and damage the body ‘s lubrication. If the gap is greater than 2 mm ,it should be repaired or replaced.


Correlation Information

  Product name:    *
  Product model:    *
  Orders units:   
  The address:   
  Number of units:    *   E-mail:    *
  Contact:      Post:   
  Telephone:    *   Fax:   
  Mobile:      Postal code:   
  Special technical requirements:
  
             
Copyright @ 2011. Shanghai Minggong Heavy Equipment Co.,Ltd.All Rights Reserved
International Trade Department:0086-21-59515633 59515366 E-mail:sales@jxjq.com
Address: No.299 Shenzhou Road,Fengxian District,Shanghai,China. P.C: 201499