Hydraulic Cylinders (typically actuated by noble gasses like nitrogen vs hydraulic oil) can collapse the springs and allow uncrushable material to exit the cone. This can be automatically actuated should the cone stop motion during operation. Cone Crusher Beveled GearsThis gear set translates the horizontal rotary motion of the counter shaft into the vertical rotary motion of the main shaft. They are typically forged and cut for strength and low noise. Top Cell LinersMaterial to be crushed enters the cone chamber through something called the top cell, which is typically lined with manganese liners. A device called a rotary feed distributor is sometimes added to the top cell to distribute the input material evenly throughout the bowl. When feeding a cone from a screen the rock obviously is always entering the crushing chamber on one side of the bowl only, the rotary feed distributor slings the materials around both side of the cone head, filling the crushing chamber more evenly resulting in potentially a better wear pattern and even better gradation from the full choke fed feed chamber.

Correlation Information

• General troubles and solution of Jaw crusher Part 3
• how to install a jaw crusher
• jaw crusher can not crush
• hammer crusher general problems and solutions
• Advanced technology of sand production
• How to maintain an impact crusher
• Artificial sand making
• hammer problems of hammer crusher